Clarion XMD3 User Manual

Thank you for purchasing this Clarion product.  
Please read this owner’s manual in its entirety before operating this equipment.  
After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
Check the contents of the enclosed warranty card and keep it carefully with this manual.  
This manual includes the operating procedures of the CD changer, MD changer, AUX, and TV tuner connected via the CeNET  
cable. The CD changer, MD changer and TV tuner have their own manuals, but no explanations for operating them are described.  
Owner’s manual  
Mode d’emploi  
Manual de instrucciones  
Istruzioni per l’uso  
Contents  
1. FEATURES ........................................................................ 2  
5. WIRED REMOTE CONTROL UNIT OPERATIONS........... 9  
2. CONTROLS ....................................................................... 3  
6. OPERATIONS .................................................................. 10  
Basic Operations .............................................................. 10  
Radio Operations ............................................................. 12  
CD Operations.................................................................. 13  
Operations Common to Each Mode ................................. 14  
3. PRECAUTIONS ................................................................. 4  
Handling Compact Discs .................................................... 5  
4. NOMENCLATURE ............................................................. 6  
Names of the Buttons and their Functions ......................... 6  
XMD3  
7. OPERATIONS OF ACCESSORIES ................................. 16  
CD/MD Changer Operations ............................................ 16  
TV Operations .................................................................. 17  
Major Button Operations when External Equipment is  
Connected to This Unit ....................................................... 7  
Display Items ...................................................................... 8  
LCD Screen ........................................................................ 8  
AM/FM MARINE CD PLAYER  
8. IN CASE OF DIFFICULTY ............................................... 19  
9. ERROR DISPLAYS .......................................................... 20  
10. SPECIFICATIONS............................................................ 21  
RADIO AM/FM-LECTEUR CD MARIN  
REPRODUCTOR DE DISCOS COMPACTOS  
NÁUTICO CON RADIO DE AM/FM  
1.FEATURES  
RADIO AM/FM CON LETTORE CD PER  
USO MARITTIMO  
G Exclusive Marinized Front Panel  
G Water Sealed Media Access Door  
G Conformally Coated Microprocessor  
G Input for Marine Wired Remote Control  
G 2 Band Parametric EQ (Z-Enhancer Plus)  
G White Positive LCD  
G CeNET Control of Optional:TV Tuner, 6 Disc CD Changer, Sirius Satellite Radio Receiver  
G Subwoofer Level Control  
G 4 Channel RCA Line Level Output  
G 208 Watt (52W 4)  
G
® Tuner with 18 FM/ 6 AM Presets  
G Magna Bass EX  
G Built in Low Pass Crossovers (off/50Hz/80Hz/120Hz)  
Clarion Co., Ltd.  
PE-2588B  
280-7867-00  
All Rights Reserved. Copyright © 2003: Clarion Co., Ltd.  
2003/3 (D•C)  
Printed in China / Imprimé en Chine / Impreso en China / Stampato in Cina  
XMD3  
2
280-7867-00/XMD3_cover  
1
2/20/03, 3:48 PM  
Handling Compact Discs  
Storage  
Use only compact discs bearing the  
or  
mark.  
Do not expose compact discs to direct sunlight or any heat  
source.  
Do not play heart-shaped, octagonal, or other specially shaped  
compact discs.  
Do not expose compact discs to excess humidity or dust.  
Do not expose compact discs to direct heat from heaters.  
Some CDs recorded in CD-R/CD-RW mode may not be usable.  
Handling  
Cleaning  
Compared to ordinary music CDs, CD-R and CD-RW discs are  
both easily affected by high temperature and humidity and  
some of CD-R and CD-RW discs may not be played. Therefore,  
do not leave them for a long time in the car.  
To remove fingermarks and dust, use a soft cloth and wipe in a  
straight line from the center of the compact disc to the circum-  
ference.  
Do not use any solvents, such as commercially available  
cleaners, anti-static spray, or thinner to clean compact discs.  
New discs may have some roughness around the edges. If such  
discs are used, the player may not work or the sound may skip.  
Use a ball-point pen or the like to remove any roughness from  
the edge of the disc.  
After using special compact disc cleaner, let the compact disc  
dry off well before playing it.  
Ball-point pen  
Roughness  
Never stick labels on the surface of the compact disc or mark  
the surface with a pencil or pen.  
Never play a compact disc with any cellophane tape or other  
glue on it or with peeling off marks. If you try to play such a  
compact disc, you may not be able to get it back out of the CD  
player or it may damage the CD player.  
Do not use compact discs that have large scratches, are  
misshapen, cracked, etc. Use of such discs may cause  
misoperation or damage.  
To remove a compact disc from its storage case, press down on  
the center of the case and lift the disc out, holding it carefully by  
the edges.  
Do not use commercially available CD protection sheets or  
discs equipped with stabilizers, etc. These may damage the disc  
or cause breakdown of the internal mechanism.  
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.  
Cerciórese de desplegar y de leer la página siguiente. / Assicurarsi di aprire e leggere la pagina successiva.  
XMD3  
5
4.NOMENCLATURE  
Note:  
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3 (unfold).  
Names of the Buttons and their Functions  
[ A-M ] button  
[ PWR ] button  
Press the button to turn on the power.  
Press and hold the button for 1 second or longer to turn off the  
power.  
Press and hold the button for 1 second or longer to switch the  
MAGNA BASS EXTEND on or off.  
Use the button to switch to the audio mode (sub woofer, bass/  
treble, balance/fader, Z-Enhancer plus adjustment).  
Switches the operation mode among the radio mode, etc.  
[ w ], [ z ] button  
[SCN] button  
Performs scan play for 10 seconds for each track while in the  
Press the buttons to increases or decreases the volume.  
CD mode.  
[ a ], [ d ] button  
Selects a station while in the radio mode or selects a track when  
listening to a CD. These buttons are also used to make various  
settings.  
[ RPT ] button  
Repeat play while in the CD mode.  
[ HOOK ]  
Open the door by push up the hook.  
Press and hold the button for 1 second or longer to switches the  
fast-forward/fast-backward.  
[ RDM ] button  
Performs random play while in the CD mode.  
[ M ] button  
Turns mute on and off.  
[ DOOR ]  
[ CD SLOT ]  
CD insertion slot.  
Door must be totally closed to prevent water go into the unit.  
[ P/A ] button  
[ RESET ] button  
Press and hold the button for about 2 seconds when the follow-  
ing symptoms occur.  
Performs preset scan while in the radio mode.  
When the button is pressed and held, auto store is performed.  
Nothing happens when buttons are pressed.  
Display is not accurate.  
[ D ] button  
Switches the display indication(main display, sub display, clock  
display).  
[Q] button  
Ejects a CD when it is loaded into the unit.  
[ T ] button  
Use the button to input a title in the CD mode.  
Press and hold the button for 1 second or longer to enter the ad-  
just mode.  
[ Z+ ] button  
Use the button to select one of the 3 types of sound characteris-  
tics already stored in memory.  
[ ISR ] button  
Recalls ISR radio station in memory.  
Press and hold for 2 seconds or longer: Stores current station  
into ISR memory (radio mode only).  
[s] button  
Plays or pauses a CD while in the CD mode.  
[ DIRECT ] button  
Stores a station into memory or recall it directly while in the ra-  
dio mode.  
[ BAND ] button  
Switches the band, or seek tuning or manual tuning while in the  
radio mode.  
Plays a first track while in the CD mode.  
XMD3  
6
Major Button Operations when External Equipment is Connected toThis Unit  
GWhen the CD/MD changer is connected  
G When the Sirius Satellite Radio is connected  
For details, see the section CD/MD changer operations.  
For details, refer to the Owners Manual provided with the  
Sirius Satellite Radio.  
[ SCN ] button  
Performs scan play for 10 seconds for each track. Disc scan play  
is performed when the button is pressed and held.  
[ PWR ] button  
Press the button to switch the operation mode among the  
SIRIUS mode, etc.  
[ RPT ] button  
Performs repeat play. When this button is pressed and held, disc  
repeat play is performed.  
[ s ] button  
Performs preset scan while in the SIRIUS mode.  
When the button is pressed and held, auto store is performed.  
[ RDM ] button  
Performs random play. Also performs disc random play when the  
button is pressed and held.  
[DIRECT] button  
Stores a station into memory or recall it directly while in the  
SIRIUS mode.  
[ DN ], [ UP ] button  
Designates the disc to be played.  
[ a ], [ d ] button  
Press the button to selects a station.  
[ D ] button  
When the button is pressed and held, switches the disc titles or  
track titles while in the MD changer mode.  
When the button is pressed and held, switches the user titles or  
track titles ,etc.while in the CD changer mode.  
What is Sirius Satellite Radio?  
Sirius is radio the way it was meant to be: Up to 100 new channels  
of digital quality programming delivered to listeners coast to coast  
via satellite. That means 50 channels of completely commercial-  
free music. Plus up to 50 more channels of news, sports, and  
entertainment from names like CNBC, Discovery, SCI-FI Channel,  
A&E, House of Blues, E!, NPR, Speedvision and ESPN.  
[ T ] button  
Use the button to input a title in the CD changer mode.  
Use the button to scroll the title during CD-text play or MD play.  
[ s ] button  
Plays or pauses a CD or MD.  
Sirius is live, dynamic entertainment, completely focused on  
listeners. Every minute of every day of every week will be different.  
All 50 commercial-free music channels are created in-house and  
hosted by DJs who know and love the music. Do you like  
Reggae? How about Classic Rock or New Rock? Sirius has an  
array of choices spanning a vast range of musical tastes including  
the hits of the 50s, 60s, 70s, & 80s as well as Jazz, Country,  
Blues, Pop, Rap, R&B, Bluegrass, Alternative, Classical, Heavy  
Metal, Dance and many others...  
[ BAND ] button  
Disc up and plays a first track.  
[ a ], [ d ] button  
Selects a track when listening to a disc.  
GWhen the TV is connected  
From its state-of-the-art, digital broadcasting facility in Rockefeller  
Center, New York City, Sirius will deliver the broadest, deepest mix  
of radio entertainment from coast to coast.  
For details, see the section TV operations.  
[ P/A ] button  
Performs preset scan while in the TV mode. When the button is  
pressed and held, auto store is performed.  
Sirius will bring you music and entertainment programming that is  
simply not available on traditional radio in any market across the  
country. Its radio like youve never heard before.  
[ s ] button  
So Get Sirius and Listen Up! For more information, visit  
siriusradio.com.  
Switches the TV picture mode or VTR (external) picture mode.  
[ DIRECT ] button  
Stores a station into memory or recall it directly.  
[ BAND ] button  
Switches the band.  
When the button is pressed and held, switches seek tuning or  
manual mode.  
[ a ], [ d ] button  
Selects a station.  
XMD3  
7
Display Items  
Z-Enhancer Plus indication  
Operation status indication  
Titles, frequency, PS names, clock, etc. are displays.  
: Preset channel indication (1 to 6)  
Disc number indication (1 to 6)  
: SIRIUS indication  
: Category indication  
: Disc indication  
: Scan indication  
: Repeat indication  
: Random indication  
: Stereo indication  
: Manual indication  
: Enter indication  
: Mute indication  
: MAGNA BASS EXTEND indication  
LCD Screen  
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it  
returns to normal temperature.  
XMD3  
8
5.WIRED REMOTE CONTROL UNIT OPERATIONS  
I XMD3 following operations are enabled by remote control with the Wired Remote Control Unit MR301RC (sold separately).  
WIRED REMOTE CONTROL UNIT  
Display Items  
Operation status indication  
Frequency, clock, etc. are displays.  
Preset channel indication (1 to 6)  
Disc number indication (1 to 6)  
SAT  
SAT  
: Stereo indication  
: SIRIUS indication  
: Mute indication  
[ w ],  
[ z ]  
SAT  
[
], [  
]
[
]
[
]
BAND  
MUTE  
[
]
SOURCE  
Changing the disc (in changer mode)  
CAUTION  
Each time the [ BAND ] button is pressed, the disc switches in the  
following order:  
Be careful about adjusting the volume, as turning on the power  
while the volume is raised to its maximum may harm your  
hearing.  
1 2 3 4 5 6 1.....  
[ SOURCE ] Button  
[ MUTE ] Button  
Turning on and off the power  
Press the [ MUTE ] button. The sound is muted immediately.  
Press the [ SOURCE ] button to turn the power on and press and  
hold it for 1 second or longer to turn the power off.  
To cancel, press the [ MUTE ] button again.  
[
], [ ] Buttons  
Changing the operation mode  
Selecting tracks (in changer mode or CD mode)  
Each time the [ SOURCE ] button is pressed, the mode switches in  
the following order:  
Press the [ ] button to start playback from the beginning of the  
following track. Press the [  
] button to start playback from the  
Radio mode SIRIUS mode CD mode CD changer mode  
MD changer mode TV mode AUX mode Radio  
mode.....  
beginning of the current track. If pressed again, the track moves to  
the previous one.  
Fast-forward and fast-backward (in changer mode or CD mode)  
Notes:  
Press and hold the [ ] button to fast-forward the disc. Press and  
If the above equipment is not connected, corresponding mode  
cannot be selected.  
hold the [  
] button to fast-backward the disc.  
Pressing and holding the [ ] or [  
] buttons for 1 second or longer  
In CD mode, if no CD is loaded in XMD3, DISCflashes on the  
Display and the radio mode is selected.  
will move forward or backward 3 times faster than normal play, and  
pressing and holding it for 3 seconds or longer will do the operation  
30 times faster.  
[ w ], [ z ] Buttons  
Adjusting the volume  
Changing preset stations (in Radio mode)  
Press the [ w ] button to increase the volume and press the [ z ]  
Each time the [ ] or [  
] buttons are pressed, the preset station  
button to decrease the volume.  
switches in the following order:  
1 2 3 4 5 6 1.....  
or  
[BAND] Button  
Changing the band (in Radio mode)  
Each time the [ BAND ] button is pressed, the band switches in the  
following order:  
65 4 3 2 1 6.....  
FM1 FM2 FM3 AM FM1.....  
Top function (in CD mode)  
Press the [ BAND ] button, then the CD will start from the first  
song (track number 1).  
XMD3  
9
6.OPERATIONS  
Basic Operations  
Note: Be sure to read this chapter referring to the front diagrams of chapter  
2. CONTROLSon page 3 (unfold).  
Main display  
CAUTION  
When this unit is turned on, starting and stopping the engine  
of a boat with its volume raised to the maximum level may  
harm your hearing.  
Sub (title) display  
Clock display  
Main display  
Be careful about adjusting the volume.  
IMPORTANT  
Door must be totally closed to prevent water go into the set!  
Once selected, the preferred display becomes the display default.  
When a function adjustment such as volume is made, the screen  
will momentarily switch to that functions display, then revert back  
to the preferred display several seconds after the adjustment.  
OK  
NG  
When you have entered a title in a CD, it appears in the sub display. If  
you have not entered a title, NO TITLEappears in the title display  
instead. For information on how to enter a title, refer to the subsection  
Entering titlesin section Operations Common to Each Mode .  
Turning on/off the power  
1. Press the [ PWR ] button.  
2. The illumination and display on the unit light up. The unit  
automatically remembers its last operation mode and will  
automatically switch to display that mode.  
Setting the Z-Enhancer Plus  
This unit are provided with 3 types of sound tone effects stored in  
memory. Select the one you prefer.  
The factory default setting is Z+ OFF.  
Each time you press the [ Z+ ] button, the tone effect changes in  
3. Press and hold the [ PWR ] button for 1 second or longer to turn  
off the power for the unit.  
Note:  
System check  
the following order:  
The first time this unit is turned on after the wire connections are  
completed, it must check what equipment is connected. When  
the power is turned on, SYSTEMand PUSH PWRappear in  
the display alternately, so press the [ PWR ] button. The system  
check starts within the unit. When the system check is complete,  
the power is turned off, so press the [ PWR ] button again.  
Z+ OFFB-BOOSTIMPACTEXCITECUS-  
TOMZ+ OFF...  
B-BOOST : bass emphasized  
IMPACT : bass and treble emphasized  
EXCITE : bass and treble emphasized mid de-emphasized  
CUSTOM : user custom  
Selecting a mode  
Z+ OFF  
: no sound effect  
1. Press the [ PWR ] button to change the operation mode.  
2. Each time you press the [ PWR ] button, the operation mode  
Adjusting the tone  
changes in the following order:  
Press the [ A-M ] button and select the item to adjust. Each time you  
press the [ A-M ] button, the item changes in the following order:  
Radio mode SIRIUS mode CD mode CD changer mode  
MD changer mode TV tuner AUX mode Radio mode...  
External equipment not connected with CeNET is not displayed.  
G When B-BOOSTis set  
S-VOL 0B-BOOSTBAL 0FAD 0Last func-  
tion mode.  
Adjusting the volume  
Press the [ w ] or [ z ] button increases or decreases the  
volume.  
G When IMPACTis set  
S-VOL 0IMPACTBAL 0FAD 0Last func-  
tion mode.  
The volume level is from 0 (minimum) to 33 (maximum).  
G When EXCITEis set  
S-VOL 0EXCITEBAL 0FAD 0Last func-  
tion mode.  
Switching the Display  
Press the [ D ] button to select the desired display.  
G When CUSTOMis set  
Each time you press the [ D ] button, the display switches in the  
following order:  
S-VOL 0BASSTREBLEBAL 0FAD 0➜  
Last function mode.  
G When Z+ OFFis set  
S-VOL 0BAL 0FAD 0Last function mode.  
If sub-woofer is effective, S-VOL 0can be selected.  
XMD3  
10  
Basic Operations  
Adjusting the subwoofer  
Adjusting the fader  
When you default select one of mode (LPF50, LPF80, LPF120)  
The factory default setting is S-VOL 0. (Adjustment range: -6 to +6)  
1. Press the [ A-M ] button and select S-VOL 0.  
1. Press the [ A-M ] button and select FAD 0.  
2. Press the [ w ] button emphasizes the sound from the front  
speaker, press the [ z ] button emphasizes the sound from the  
rear speaker.  
2. Press the [ w ] or [ z ] button increases or deceases the  
subwoofer volume.  
The factory default setting is FAD 0. (Adjustment range: F12 to  
R12)  
Press and hold the [ w ] or [ z ] button automatically in-  
3. When the adjustment is complete, press the [ A-M ] button  
creases or deceases the subwoofer volume.  
several times until the function mode is reached.  
3. When the adjustment is complete, press the [ A-M ] button  
several times until the function mode is reached.  
Adjusting the Z-Enhancer Plus  
1. Press the [ Z+ ] button and select the Z-Enhancer Plus mode to  
adjust.  
Adjusting the bass (Gain, Frequency, Q-curve)  
This adjustment can be performed when the Z-Enhancer Plus is  
set to CUSTOM.  
2. Press the [ A-M ] button and press the [ w ] button adjusts in  
the + direction; press the [ z ] button adjusts in the - direction.  
1. Press the [ A-M ] button and select BASS.  
G When B-BST 0is selected, you can adjust the bass in the  
range of -3 to 3.  
2. Press the [ w ] button emphasizes the bass.  
Press the [ z ] button attenuates the bass.  
The factory default setting is B<G 0>. (Adjustment range: 6 to  
+6)  
G When IMPACT 0is selected, you can adjust the bass and  
treble in the range of -3 to 3.  
3. Press the [ d ] or [ a ] button to select B<F 60>.  
G When EXCITE 0is selected, you can adjust the bass and  
treble in the range of -3 to 3.  
Press and hold the [ Z+ ] button for 2 seconds or longer to change  
to the CUSTOMmode.  
Bass/treble characteristics become flat and the indication  
Z+FLATis shown in the display.  
Press the [ w ] or [ z ] button to select the frequency.  
The factory default setting is B<F 60>.(Adjustment 60/100/200  
Hz)  
4. Press the [ d ] or [ a ] button to select B<Q 1>.  
Press the [ w ] or [ z ] button to select the Q-curve.  
The factory default setting is B<Q 1>.(Adjustment 1/1.25/1.5/2)  
Press the [ Z+ ] button again to change to the Z+ OFFmode.  
5. When the adjustment is complete, press the [ A-M ] button  
Turning on/off MAGNA BASS EXTEND  
The MAGNA BASS EXTEND does not adjust the low sound area  
like the normal sound adjustment function, but emphasizes the  
deep bass sound area to provide you with a dynamic sound.  
several times until the function mode is reached.  
Adjusting the treble (Gain, Frequency)  
This adjustment can be performed when the Z-Enhancer Plus is  
set to CUSTOM.  
The factory default setting is off.  
1. Press and hold the [ A-M ] button for 1 second or longer to turn  
on the MAGNA BASS EXTEND effect. M-B EXlights in the  
display.  
1. Press the [ A-M ] button and select TREBLE.  
2. Press the [ w ] button emphasizes the treble.  
Press the [ z ] button attenuates the treble.  
2. Press and hold the [ A-M ] button for 1 second or longer to turn  
off the MAGNA BASS EXTEND effect. M-B EXgoes off from  
the display.  
The factory default setting is T<G 0>. (Adjustment range: 6 to  
+6)  
3. Press the [ d ] or [ a ] button to select T<F 10>.  
Press the [ w ] or [ z ] button to select the frequency.  
The factory default setting is T<F 10>.(Adjustment 10 kHz/15  
kHz)  
4. When the adjustment is complete, press the [ A-M ] button  
several times until the function mode is reached.  
Adjusting the balance  
1. Press the [ A-M ] button and select BAL 0.  
2. Press the [ w ] button emphasizes the sound from the right  
speaker, press the [ z ] button emphasizes the sound from the  
left speaker.  
The factory default setting is BAL 0. (Adjustment range: L13 to  
R13)  
3. When the adjustment is complete, press the [ A-M ] button  
several times until the function mode is reached.  
XMD3  
11  
Radio Operations  
FM reception  
Seek tuning  
For enhanced FM performance the  
® tuner includes signal  
1. Press the [ BAND ] button and select the desired band (FM or AM).  
actuated stereo control, Enhanced Multi AGC, Impulse noise reduction  
curcuits and Multipath noise reduction circuits.  
If MANUis lit in the display, press and hold the [ BAND ] button  
for 1 second or longer. MANUin the display goes off and seek  
tuning is now available.  
Changing the reception area  
2. Press the [ a ] or [ d ] button to automatically seek a station.  
When the [ d ] button is pressed, the station is sought in the  
direction of higher frequencies; if the [ a ] button is pressed,  
the station is sought in the direction of lower frequencies.  
This unit is initially set to USA frequency intervals of 10kHz for AM and  
200kHz for FM. When using it outside the USA, the frequency reception  
range can be switched to the intervals below.  
U.S. standard  
Europe  
Other  
(Initial setting) standard  
countries  
Manual tuning  
Frequency  
AM spacing  
There are 2 ways available: Quick tuning and step tuning.  
10 kHz  
530 to  
9 kHz  
531 to  
9 kHz  
When you are in the step tuning mode, the frequency changes one  
step at a time. In the quick tuning mode, you can quickly tune the  
desired frequency.  
Frequency  
range  
531 to  
1,629 kHz  
1,710 kHz  
1,602 kHz  
Frequency  
FM spacing  
Seek:100 kHz  
Manual:50kHz  
200 kHz  
50 kHz  
1. Press the [BAND] button and select the desired band (FM or AM).  
If MANUis not lit in the display, press and hold the [BAND]  
button for 1 second or longer. MANUis lit in the display and  
manual tuning is now available.  
Frequency  
range  
87.9 to  
107.9 MHz  
87.5 to  
108 MHz  
87.0 to  
108 MHz  
Setting the reception area  
Any station preset memories are lost when the reception area is  
changed.  
2. Tune in a station.  
G Quick tuning:  
Press and hold the [ a ] or [ d ] button for 1 second or longer  
1. Press the [ BAND ] button and select the desired radio band  
to tune in a station.  
(FM or AM).  
G Step tuning:  
Press the [ a ] or [ d ] button to manually tune in a station.  
U.S. standard (initial setting)  
2-1. While pressing the [ A-M ] button, press and hold the  
number 1of the [ DIRECT ] buttons for 2 seconds or  
longer.  
Recalling a preset station  
A total of 24 preset positions (6-FM1, 6-FM2, 6-FM3, 6-AM) exist  
to store individual radio stations in memory. Pressing the corre-  
sponding [ DIRECT ] button recalls the stored radio frequency  
automatically.  
Europe standard (new setting)  
2-1. While pressing the [ A-M ] button, press and hold the  
number 3of the [ DIRECT ] buttons for 2 seconds or  
longer.  
1. Press the [ BAND ] button and select the desired band (FM or AM).  
Other countries (new setting)  
2. Press the corresponding [ DIRECT ] button to recall the stored  
2-1. While pressing the [ A-M ] button, press and hold the  
number 2of the [ DIRECT ] buttons for 2 seconds or  
longer.  
station.  
Press and hold one of the [ DIRECT ] buttons for 2 seconds or  
longer to store that station into preset memory.  
Listening to the radio  
Manual memory  
1. Press the [ PWR ] button and select the radio mode. The  
frequency or PS appears in the display.  
1. Select the desired station with seek tuning, manual tuning or  
preset tuning.  
PS: Programme service name  
2. Press and hold one of the [ DIRECT ] buttons for 2 seconds or  
2. Press the [ BAND ] button and select the radio band. Each time  
the button is pressed, the radio reception band changes in the  
following order:  
longer to store the current station into preset memory.  
FM1 FM2 FM3 AM FM1...  
Auto store  
3. Press the [ a ] or [ d ] button to tune in the desired station.  
Auto store is a function for storing up to 6 stations that are auto-  
matically tuned in sequentially. If 6 receivable stations cannot be  
received, a previously stored station remains unoverwritten at the  
memory position.  
Mute  
Use this function to turn off the sound immediately.  
1. Press the [ M ] button.  
1. Press the [ BAND ] button and select the desired band (FM or AM).  
2. Press and hold the [ P/A ] button for 2 seconds or longer. The  
stations with good reception are stored automatically to the  
preset channels.  
The sound turns off and MUTEappears in the display.  
2. Press the [ M ] button again to cancel the mute mode.  
If auto store is performed in the FM bands, the stations are stored  
in FM3 even if FM1 or FM2 was chosen for storing stations.  
Tuning  
There are 3 types of tuning mode available, seek tuning, manual  
tuning and preset tuning.  
XMD3  
12  
Radio Operations CD Operations  
Preset scan  
Loading a CD  
Preset scan receives the stations stored in preset memory in order.  
This function is useful when searching for a desired station in  
memory.  
1. Open the door by push up the [ HOOK ].  
2. Insert a CD into the centre of the [ CD SLOT ] with the label  
side facing up, and completely close the [ DOOR ].  
The CD plays automatically after loading.  
1. Press the [ P/A ] button.  
2. When a desired station is tuned in, press the [ P/A ] button  
For 5-inch (12 cm) CD  
For 3-inch (8 cm) single CD  
again to continue receiving that station.  
Note:  
Be careful not to press and hold the [ P/A ] button for 2 seconds  
or longer, otherwise the auto store function is engaged and the  
unit starts storing stations.  
Instant station recall (ISR)  
Instant station recall is a special radio preset that instantly ac-  
cesses a favorite radio station at a touch of a button. The ISR  
function even operates with the unit in other modes.  
Notes:  
Never insert foreign objects into the CD SLOT.  
If the CD is not inserted easily, there may be another CD in the  
mechanism or the unit may require service.  
G ISR memory  
1. Select the station that you wish to store in ISR memory.  
2. Press and hold the [ ISR ] button for 2 seconds or longer.  
Discs not bearing the  
or  
mark and CD-ROMs cannot  
G Recalling a station with ISR  
In any mode, press the [ ISR ] button to turn on the radio function  
and tune the selected radio station. ISRappears in the display.  
Press the [ISR] button again to return to the previous mode.  
be played by this unit.  
Some CDs recorded in CD-R/CD-RW mode may not be usable.  
Loading 8 cm compact discs  
No adapter is required to play an 8 cm CD.  
Insert the 8 cm CD into the centre of the insertion slot.  
Listening to a CD already inserted  
Press the [ PWR ] button to select the CD mode. Play starts automati-  
cally. If no CD is loaded in the unit, NO DISCappears in the display.  
Pausing play  
1. Press the [ s ] button to pause play. PAUSEappears in the  
display.  
2. To resume CD play, press the [ s ] button again.  
Displaying CD titles  
This unit can display title data for CD-text CDs and user titles input  
with this unit.  
1. Press the [ D ] button to display the title.  
2. Each time you press and hold the [ D ] button for 1 second or  
longer, the title display changes in the following order:  
User title (disc) CD-text title (disc) Artist name CD-text  
title (track) User title (disc)...  
Note:  
If the CD playing is not a CD-text CD or no user title has been  
input, NO TITLEappears in the display.  
Ejecting a CD  
1. Open the door by push up the [ HOOK ].  
2. Press the [ Q ] to eject the CD. Take it out from the ejected  
position.  
Notes:  
If a CD (12 cm) is left in the ejected position for 15 seconds, the  
CD is automatically reloaded (Auto reload).  
8 cm CDs are not auto reloaded. Be sure to remove it when ejected.  
If you force a CD into before auto reloading, this can damage the CD.  
XMD3  
13  
CD Operations  
Operations Common to Each Mode  
Selecting a track  
Entering titles  
Titles up to 8 characters long can be stored in memory and  
displayed for CD, CD changer and TV stations. The number of titles  
that can be entered for each mode are as follows.  
G Track-up  
1. Press the [ d ] button to move ahead to the beginning of the  
next track.  
Mode  
Number of titles  
50 titles  
2. Each time you press the [ d ] button, the track advances  
ahead to the beginning of the next track.  
CD mode  
TV mode  
20 titles  
G Track-down  
1. Press the [ a ] button to move back to the beginning of the  
CD changer mode  
CDC625 connected  
CDC655Tz connected  
CDC1255z connected  
Number of titles  
100 titles  
current track.  
2. Press the [ a ] button twice to move to the beginning of the  
previous track.  
100 titles  
50 titles  
Fast-forward/fast-backward  
G Fast-forward  
1. Press the [ PWR ] button to select the mode you want to enter a  
title (CD, CD changer or TV).  
Press and hold the [ d ] button for 1 second or longer.  
G Fast-backward  
2. Select and play a CD in the CD changer or tune in to a TV  
station for which you want to enter the title.  
Press and hold the [ a ] button for 1 second or longer.  
3. Press the [ D ] button and display the sub.  
4. Press the [ T ] button. The cursor position flashes.  
5. Press the [ a ] or [ d ] button to move the cursor.  
6. Press the [ D ] button to select a character. Each time you press  
Top function  
The top function resets the CD player to the first track of the disc.  
Press the [ BAND ] button to play the first track (track No. 1) on the  
disc.  
the [ D ] button, the character changes in the following order:  
Numbers Symbols Capital letters Numbers...  
7. Press the [ w ] or [ z ] button to select the desired character.  
Scan play  
Press the [ a ] button moves the cursor to the next character;  
Press the [ d ] button moves the cursor to the previous  
character.  
The scan play locates and plays the first 10 seconds of each track  
on a disc automatically. This function continues on the disc until it  
is cancelled.  
8. Repeat steps 5 to 7 to enter up to 8 characters for the title.  
The scan play is useful when you want to select a desired track.  
1. Press the [ SCN ] button to start scan play. SCNlights in the  
9. Press and hold the [ s ] button for 2 seconds or longer to  
store the title into memory and cancel title input mode.  
display.  
2. To cancel the scan play, press the [ SCN ] button again. SCN”  
Clearing titles  
goes off from the display and the current track continues to play.  
1. Select and play a CD in the CD changer or tune in to a TV  
station for which you want to clear the title.  
Repeat play  
2. Press the [ D ] button and display the sub.  
The repeat play continuously plays the current track. This function  
continues automatically until it is cancelled.  
3. Press the [ T ] button. Titles appears in the display and the  
display switches to the title input display.  
1. Press the [ RPT ] button. RPTlights in the display and the  
4. Press the [ BAND ] button.  
current track is repeated.  
5. Press and hold the [ s ] button for 2 seconds or longer to  
2. To cancel the repeat play, press the [ RPT ] button again. RPT”  
clear the title and cancel title input mode.  
goes off from the display and normal play resumes.  
Setting the low pass filter  
This function allows you to set the low-pass filter for sub-woofer  
output.  
The factory default setting is LPF 120.  
1. Press and hold the [ T ] button for 1 second or longer to switch  
Random play  
The random play selects and plays individual tracks on a disc in no  
particular order. This function continues automatically until it is  
cancelled.  
1. Press the [ RDM ] button. RDMlights in the display, an  
to the adjustment selection display.  
individual track is selected randomly and play begins.  
2. Press the [ a ] or [ d ] button and select SW LPF.  
2. To cancel the random play, press the [ RDM ] button again.  
3. Press the [ w ] or [ z ] button to setting changes as following  
RDMgoes off from the display and normal play resumes.  
order:  
LPF 120”  
LPF 80”  
LPF 50”  
REAR”  
4. Press the [ T ] button to return to the previous mode.  
XMD3  
14  
Operations Common to Each Mode  
6. Press the [ s ] button to store the time into memory.  
7. Press the [ T ] button to return to the previous mode.  
Dimmer control  
You can setting the dimmer control on or off.  
The factory default setting is ON.  
Note:  
1. Press and hold the [ T ] button for 1 second or longer to switch  
You cannot set the clock when it is displayed with only the  
ignition on. If you drain or remove the cars battery or take out  
this unit, the clock is reset. While setting the clock, if another  
button or operation is selected, the clock set mode is canceled.  
to the adjustment selection display.  
2. Press the [ a ] or [ d ] button to select DIMMER.  
3. Press the [ w ] or [ z ] button to select ONor OFF.  
4. Press the [ T ] button to return to the previous mode.  
Turning the screen saver function on or off  
This unit is provided with the screen saver function.You can turn  
on or off this function.  
Adjusting the display contrast  
You can adjust the display contrast to match the angle of  
instalation of the unit.  
The factory default setting is 5.(Adjustment level 1 to 8)  
1. Press and hold the [ T ] button for 1 second or longer to switch  
If the button operation is performed with the screen saver function  
on, the operation display corresponding to the button operation is  
shown for about 30 seconds and the display returns to the screen  
saver display.  
to the adjustment selection display.  
The factory default setting is SS.  
2. Press the [ a ] or [ d ] button and select CONTRAST.  
3. Press the [ w ] or [ z ] button to adjust the contrast.  
4. Press the [ T ] button to return to the previous mode.  
1. Press and hold the [ T ] button for 1 second or longer to switch  
to the adjustment selection display.  
2. Press the [ a ] or [ d ] button and select SCRN SVR.  
3. Press the [ s ] button.  
Setting the method for title scroll  
Set how to scroll in CD-TEXT or MD.  
4. Press the [ w ] or [ z ] button to setting changes as following  
order:  
The factory default setting is ON.  
MESSAGE”  
SS(screen saver)  
OFF (off)”  
1. Press and hold the [ T ] button for 1 second or longer to switch  
5. Press the [ s ] button to store the setting.  
6. Press the [ T ] button to return to the previous mode.  
to the adjustment selection display.  
2. Press the [ a ] or [ d ] button and select SCROLL.  
3. Press the [ w ] or [ z ] button to select ONor OFF.  
The following illustration presents one of the patterns which are  
shown when the screen saver function is turned on.  
G ON  
: To scroll automatically.  
G OFF : To scroll just 1 time when the title was changed or  
the title key was pressed.  
4. Press the [ T ] button to return to the previous mode.  
Entering message information  
Message up to 30 characters long can stored in memory and  
display for any mode.  
AUX function  
This system has an external RCA input so you can listen to  
sounds and music from external devices connected to this unit.  
Any of the messages input can be displayed as one of the patterns  
for the screen saver function.  
The factory default setting is WELCOME TO CLARION.  
1. Press and hold the [ T ] button for 1 second or longer to switch  
Selecting AUX IN sensitivity  
to the adjustment selection display.  
Make the following settings to select the sensitivity when sounds  
from external devices connected to this unit are difficult to hear  
even after adjusting the volume.  
2. Press the [ a ] or [ d ] button and select INPUT.  
3. Press the [ s ] button.  
4. Press the [ a ] or [ d ] button to move the cursor.  
The factory default setting is MID.  
1. Press and hold the [ T ] button for 1 second or longer to switch  
5. Press the [ D ] button to select a character. Each time you press  
to the adjustment selection display.  
the [ D ] button, the character changes in the following order:  
2. Press the [ a ] or [ d ] button and select AUX SENS.  
Numbers Symbols Capital letters Numbers...  
3. Press the [ w ] or [ z ] button needed and select from HIGH  
6. Press the [ w ] or [ z ] button to select the desired character.  
Press the [ d ] button moves the cursor to the next character;  
Pressing the [ a ] button moves the cursor to the previous  
character.  
(high), MID (middle)or LOW (low).  
4. Press the [ T ] button to return to the previous mode.  
7. Repeat steps 4 to 6 to enter up to 30 characters for the mes-  
sage.  
Setting the clock  
1. Press and hold the [ T ] button for 1 second or longer to switch  
to the adjustment selection display.  
8. Press and hold the [ s ] button for 2 seconds or longer to  
store the message into memory and cancel message input  
mode.  
2. Press the [ a ] or [ d ] button to select CLOCK.  
3. Press the [ s ] button.  
4. Press the [ a ] or [ d ] button to select the hour or the minute.  
5. Press the [ w ] or [ z ] button to set the correct time.  
The clock is displayed in 12-hour format.  
9. Press the [ T ] button to return to the previous mode.  
XMD3  
15  
7.OPERATIONS OF ACCESSORIES  
CD/MD Changer Operations  
CD/MD changer functions  
Procedure to scroll a title  
When an optional CD/MD changer is connected through the  
CeNET cable, this unit controls all CD/MD changer functions. This  
unit can control a total of 2 changers (MD and/or CD).  
Set SCROLLto ONor OFF.  
(The factory default setting is ON. Refer to the subsection  
Setting the method for Title scrollin section Operation  
common to each mode.)  
Press the [ PWR ] button and select the CD(MD) changer mode to  
start play. If 2 CD(MD) changers are connected, press the [ PWR ]  
button to select the CD(MD) changer for play.  
If NO MAGappears in the display, insert the magazine into the CD  
changer. DISC CHKappears in the display while the player loads  
(checks) the magazine.  
G When set to ON”  
The title is automatically kept scrolling.  
G When set to OFF”  
To scroll just 1 time when the title was changed or the [ T ]  
button was pressed.  
If NO DISCappears in the display, eject the magazine and insert  
discs into each slot. Then, reinsert the magazine back into the CD  
changer.  
Selecting a CD or MD  
If NO DISCappears in the display, load MDs into the MD changer.  
1. Press the [ UP ] or [ DN ] button to select the desired disc.  
If a CD is not loaded in a slot of magazine, pressing the [ UP ]  
or [ DN ] button can not work.  
CAUTION  
CD-ROM discs cannot be played in the CD changer.  
If an MD is not loaded in a slot of MD changer, pressing the [  
UP ] or [ DN ] button can not work.  
Pausing play  
Selecting a track  
G Track-up  
1. Press the [ s ] button to pause play. PAUSEappears in the  
display.  
1. Press the [ d ] button to move ahead to the beginning of the  
2. To resume play, press the [ s ] button again.  
next track.  
2. Each time you press the [ d ] button, the track advances  
Displaying CD titles  
ahead to the beginning of the next track.  
This unit can display title data for CD-text CDs and user titles input  
with this unit.  
G Track-down  
1. Press the [ a ] button to move back to the beginning of the  
Title data for CD-text CDs can be displayed with this unit only when it  
is connected to CDC655Tz.  
current track.  
2. Press the [ a ] button twice to move to the beginning of the  
G When connected to DCZ625 or CDC1255z  
1. Press the [ D ] button to display the title.  
previous track.  
G When connected to CDC655Tz  
1. Press the [ D ] button to display the title.  
Fast-forward/fast-backward  
G Fast-forward  
2. Each time you press and hold the [ D ] button for 1 second or  
Press and hold the [ d ] button for 1 second or longer.  
longer, the title display changes in the following order:  
User title (disc) CD-text title (disc) Artist name CD-text  
G Fast-backward  
title (track) User title (disc)...  
Press and hold the [ a ] button for 1 second or longer.  
Notes:  
If the CD playing is not a CD-text CD or no user title has been  
input, NO TITLEappears in the display.  
If a CD-text CD is not input its disc title or a track title, NO  
TITLEappears in the display.  
Scan play  
Scan play locates and plays the first 10 seconds of each track on a  
disc automatically. This function continues on the disc until it is  
cancelled.  
The scan play is useful when you want to select a desired track.  
1. Press the [ SCN ] button to start track scanning. SCNlights in  
Switching disc titles and track titles(MD)  
This unit can display disc titles and track titles already entered on  
MDs.  
Titles cannot be entered for MDs with this unit.  
1. Press the [ D ] button to display the title. The disc title or track  
the display.  
2. To cancel the scan play, press the [ SCN ] button again. SCN”  
goes off from the display and the current track continues to play.  
title is displayed.  
Disc scan play  
2. Each time you press and hold the [ D ] button for 1 second or  
longer, the display toggles between the disc title and the track  
title.  
Disc scan play locates and plays the first 10 seconds of the first  
track on each disc in the currently selected CD (MD) changer. This  
function continues automatically until it is cancelled.  
Note:  
Disc scan play is useful when you want to select a desired CD (MD).  
1. Press and hold the [ SCN ] button for 1 second or longer. DISC”  
If an MD is not input its disc title or a track title, NOTITLE”  
appears in the display.  
and SCNlight in the display and disc scan play starts.  
XMD3  
16  
CD/MD Changer Operations TV Operations  
2. To cancel disc scan play, press the [ SCN ] button again. DISC”  
TV tuner functions  
and SCNgo off from the display and the current track contin-  
ues to play.  
When an optional TV tuner is connected through the CeNET cable,  
this unit controls all TV tuner functions. To watch TV requires a TV  
tuner and monitor.  
Repeat play  
Repeat play continuously plays the current track. This function  
continues automatically until it is cancelled.  
Watching a TV  
1. Press the [ PWR ] button and select the TV mode.  
1. Press the [ RPT ] button. RPTlights in the display and the  
2. Press the [ BAND ] button to select the desired TV band (TV1  
or TV2). Each time the button is pressed, the input selection  
toggles between TV1 and TV2.  
current track is repeated.  
2. To cancel repeat play, press the [ RPT ] button again. RPT”  
goes off from the display and normal play resumes.  
3. Press the [ a ] or [ d ] button to tune in the desired TV station.  
Disc repeat play  
Watching a video  
After all the tracks on the current disc have been played, disc  
repeat play automatically replays the current disc over from the  
first track. This function continues automatically until it is cancelled.  
The TV tuner has a VTR input terminal to which 1 external device  
can be connected. Connect a 12 V video cassette player (VCP) or  
video cassette recorder (VCR) to the TV tuner input terminal.  
1. Press and hold the [ RPT ] button for 1 second or longer. DISC”  
1. Press the [ s ] button to select VTR.  
2. To return to the TV broadcast, press the [ s ] button.  
and RPTlight in the display and disc repeat play starts.  
2. To cancel disc repeat play, press and hold the [ RPT ] button  
again. DISCand RPTgo off from the display and normal play  
resumes on the current track.  
Tuning  
There are 3 types of tuning mode available, Seek tuning, manual  
tuning and preset tuning.  
Random play  
Random play selects and plays individual tracks on the disc in no  
particular order. This function continues automatically until it is  
cancelled.  
Seek tuning  
1. Press the [ BAND ] button and select the desired TV band (TV1  
or TV2).  
1. Press the [ RDM ] button. RDMlights in the display and  
If MANUis lit in the display, press and hold the [ BAND ] button  
for 1 second or longer. MANUin the display goes off and seek  
tuning is now available.  
random play begins.  
2. To cancel random play, press the [ RDM ] button again. RDM”  
goes off from the display and normal play resumes.  
2. Press the [ a ] or [ d ] button to automatically seek a station.  
Press the [ d ] button to automatically tune up the frequency  
band to the next available TV station; press the [ a ] button to  
automatically tune down.  
Disc random play  
The disc random play selects and plays individual tracks or discs  
automatically in no particular order. This function continues  
automatically until it is cancelled.  
Manual tuning  
1. Press and hold the [ RDM ] button for 1 second or longer.  
DISCand RDMlight in the display and disc random play  
starts.  
There are 2 ways available: Quick tuning and step tuning.  
When you are in the step tuning mode, the frequency changes one  
step at a time. In the quick tuning mode, you can quickly tune the  
desired frequency.  
2. To cancel disc random play, press and hold the [ RDM ] button  
again. DISCand RDMgo off from the display and normal  
play resumes from the current track.  
1. Press the [ BAND ] button and select the desired band (TV1 or TV2).  
If MANUis not lit in the display, press and hold the [ BAND ]  
button for 1 second or longer. MANUlights in the display and  
manual tuning is now available.  
2. Tune in a station.  
G Quick tuning:  
Press and hold the [ a ] or [ d ] button for 1 second or longer  
to tune in a station.  
G Step tuning:  
Press the [ a ] or [ d ] button to manually tune in a station.  
XMD3  
17  
TV Operations  
Recalling a preset station  
Setting the TV diver  
A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This  
allows you to select your favorite TV stations and store them in  
memory for later recall.  
You can change the reception setting for the TV antenna con-  
nected to the TV tuner.  
1. Press and hold the [ T ] button for 1 second or longer to switch  
1. Press the [ BAND ] button and select the desired TV band (TV1 or TV2).  
to the adjustment selection display.  
2. To recall a stored TV station, press the desired [ DIRECT ]  
2. Press the [ a ] or [ d ] button to select TV DIVER.  
button to select that station.  
Press and hold one of the [ DIRECT ] buttons for 2 seconds or  
longer to store the current station into preset memory.  
3. Press the [ w ] button to set to DIVR ONor press the [ z ]  
button to set to DIVR OFF.  
G DIVR ON : Sets reception emphasizing the visual.  
G DIVR OFF : Sets the diver setting to OFF.  
Manual memory  
4. Press the [ T ] button to return to the previous mode.  
1. Select the desired station with seek tuning, manual tuning or  
preset tuning.  
2. Press and hold one of [ DIRECT ] buttons for 2 seconds or  
longer to store the current station into preset memory.  
Auto store  
Auto store selects 6 TV stations automatically and stores each one  
into preset memory.  
If there are not 6 stations with good reception, stations previously  
stored in memory remain and only the strong stations are stored  
into memory.  
1. Press the [ BAND ] button and select the desired TV band (TV1  
or TV2).  
2. Press and hold the [ P/A ] button for 2 seconds or longer. The  
stations with good reception are stored automatically to the  
preset channels.  
Preset scan  
Preset scan allows the user to view each preset position before it  
automatically advances to the next preset. This function is useful  
for searching for a desired TV station in memory.  
1. Press the [ P/A ] button.  
2. When the desired station is found, press the [P/A] button again  
to remain tuned to that station.  
Note:  
Do not press and hold the [ P/A ] button for 2 seconds or longer.  
Doing so will trigger the auto store function and start storing  
stations into memory.  
Setting the TV area  
When you select the TV area (TV reception area), the TV tuner  
area setting changes.  
1. Press and hold the [ T ] button for 1 second or longer to switch  
to the adjustment selection display.  
2. Press the [ a ] or [ d ] button to select TV AREA.  
3. Press the [ s ] button.  
4. Press the [ w ] or [ z ] button to select the reception area.  
5. Press the [ s ] button.  
6. Press the [ T ] button to return to the previous mode.  
XMD3  
18  
8.IN CASE OF DIFFICULTY  
Problem  
Cause  
Solution  
Power does not turn on. (No sound is pro-  
duced.)  
Fuse is blown.  
Replace with a fuse of the same amperage. If  
the fuse blows again, consult your store of pur-  
chase.  
Incorrect wiring.  
Consult your store of purchase.  
Compact disc cannot be loaded.  
Sound skips or is noisy.  
Another compact disc is already loaded.  
Compact disc is dirty.  
Eject the compact disc before loading the new  
one.  
Clean the compact disc with a soft cloth.  
Compact disc is heavily scratched or Replace with a compact disc with no scratches.  
warped.  
Sound is bad directly after power is turned  
on.  
Water droplets may form on the internal lens Let dry for about 1 hour with the power on.  
when the car is parked in a humid place.  
Nothing happens when buttons are  
pressed. display is not accurate.  
Microprocessor has malfunctioned due to Turn off the power, then open the [ DOOR ] by up  
noise, etc.  
the [ HOOK ] .  
Press the reset button for about 2 seconds with  
a thin rod.  
Reset Button  
XMD3  
19  
9.ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
ERROR 2  
Cause  
Measure  
A CD is caught inside the CD deck and is not ejected.  
This is a failure of CD decks mechanism and consult  
your store of purchase.  
ERROR 3  
ERROR 6  
A CD cannot be played due to scratches, etc.  
Replace with a non-scratched, non-warped-disc.  
Eject the disc then reload it properly.  
A CD is loaded upside-down inside the CD deck and  
does not play.  
ERROR 2  
ERROR 3  
ERROR 6  
ERROR H  
ERROR 2  
ERROR 3  
ERROR 6  
A CD inside the CD changer is not loaded.  
This is a failure of CD changers mechanism and consult  
your store of purchase.  
A CD inside the CD changer cannot be played due to  
scratches, etc.  
Replace with a non-scratched, non-warped disc.  
A CD inside the CD changer cannot be played because it Eject the disc then reload it properly.  
is loaded upside-down.  
Displayed when the temperature in the MD changer is  
too high and playback has been stopped automatically.  
Lower the surrounding temperature and wait for a while  
to cool off MD changer.  
An MD inside the MD changer is not loaded.  
This is a failure of MD changers mechanism and consult  
your store of purchase.  
An MD inside the MD changer cannot be played due to  
scratches, etc.  
Replace with a non-scratched, non-warped disc.  
An MD inside the MD changer cannot be played because Eject the disc then reload it properly.  
it is loaded upside-down.  
Displayed when a non-recorded MD is loaded in the MD  
changer.  
Load a pre-recorded MD in the MD changer.  
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and  
consult your store of purchase.  
XMD3  
20  
10. SPECIFICATIONS  
FM Tuner  
Audio  
Frequency Range :  
Maximum Power Output : 208 W (52 W 4 ch)  
U.S.A  
: 87.9 MHz to 107.9 MHz  
Continuous Average Power Output :  
Europe : 87.5 MHz to 108.0 MHz  
Australia : 87.0 MHz to 108.0 MHz  
17 W 4, into 4 , 20 Hz to 20 kHz, 1%THD  
Bass Control Action (60 Hz) : 15 dB  
Treble Control Action (10 kHz) : 12 dB  
Line Output Level (CD 1 kHz) : 2 V  
Usable Sensitivity : 9 dBf  
50dB Quieting Sensitivity : 15 dBf  
Alternate Channel Selectivity : 70 dB  
Stereo Separation (1 kHz) : 35 dB  
Frequency Response ( 3 dB) : 30 Hz to 15 kHz  
General  
Power Supply Voltage :  
14.4 V DC (10.8 to 15.6 V allowable), negative ground  
AM Tuner  
Current Consumption : Less than 15 A  
Speaker Impedance : 4 (4 to 8 allowable)  
Weight / Source unit : 3.52 lb. (1.6 kg)  
Frequency Range :  
U.S.A  
Europe  
: 530 kHz to 1710 kHz  
: 531 kHz to 1602 kHz  
Dimensions / Source unit :  
Australia : 531 kHz to 1629 kHz  
7" (Width) 2" (Height) 6" (Depth)  
[178 (W) 50 (H) 152 (D) mm]  
Usable Sensitivity : 25 µV  
Escutcheon section :  
9" (Width) 4" (Height) 1-1/2" (Depth)  
[232 (W) 95 (H) 28 (D) mm]  
CD Player  
System : Compact disc digital audio system  
Usable Discs : Compact disc  
Frequency Response ( 1 dB) : 10 Hz to 20 kHz  
Signal to Noise Ratio (1 kHz) : 100 dB  
Dynamic Range (1 kHz) : 95 dB  
Harmonic Distortion : 0.01%  
Note:  
Specifications and design are subject to change without notice for further improvement.  
XMD3  
21  
XMD3  
22  

Alpine Electronics Car Stereo System CDE 130RR User Manual
Blaupunkt Car Stereo System CD50 U User Manual
Bunn IMIX 3S+ User Manual
Burley BEE User Manual
Canon 2699B001 User Manual
Canon IX7 User Manual
Canon Vixia Hf R42 Digital Camcorder 8152B005 User Manual
CycleOps ERUTT3 User Manual
Gitzo GT2932 User Manual
JBL GTO838 User Manual